الثلاثاء 21 11 2017 - 02:43 صباحاً
1003-2017

برنامج Hard Disk Sentinel Pro 5.00 Build 8557 Final

لفحص وإصلاح الهارد ديسك

تاريخ الإضافة : الجمعة 10 03 2017 - 09:55 مساءً اخر تحديث : الجمعة 10 03 2017 - 10:33 مساءً
17,442
برنامج Hard Disk Sentinel Pro 5.00 Build 8557 Final
برنامج النسخة بروفيشنال لفحص واصلاح اعطاب القرص الصلب ( الهارد ديسك ) وعرض تقرير عن حالة وكفاءة اقراص SSD و HDD , يقوم برنامح Hard disk sentinel بتحليل اقراص التخزين وعرض تقرير مفصل عنها وعن الاخطاء التي عثر عليها ودرجة حرارة القرص وكفائته وهو يدعم جميع انواع الاقراص من IDE و SATA و USB وهو يحافظ على بياناتك الهامة الموجوده على هذه الاقراص من التلف وذلك بعمل صيانة لجميع قطاعات القرص Sectors واصلاح الاخطاء فيها , يعتبر برنامج HDSentinel هو الحل الامثل لاصلاح اخطاء الباد سيكتور Bad Sector والحفاظ على معلوماتك الهامة من الضياع لوجود فيها خاصية حساسة للغاية عن حالة القرص ودرجة حرارته والمشاكل الموجوده فيه 

التفعيل
قم بتشغيل الباتش والضغط على باتش
Version of the program: 5.00 Build 8557 
Language: Russian, English, and others 
Treatment: complete 
Type of medicine:patch 

System requirements:
Windows® 95, 98, 98SE, ME, NT4, 2000, XP, 2003, 2008, Vista
Windows 7, Windows Home Server, Windows 8, Windows 8.1, Windows 10

Description : Hard Disk Sentinel Pro - a utility for monitoring and monitoring the status of hard drives. Allows you to identify potential problems, performance degradation and possible malfunctions. Can alert the user in the event of a malfunction or temperature rise. Its capabilities clearly will not seem superfluous, especially in the case of the special value of stored data with the growth of the volume of drives. The program monitors the status of hard disks, including temperature indicators and SMART parameters (Self-Monitoring, Analysis and Reporting Technology, the technology built into most modern drives) for each hard disk. Also measures the data transfer rate in real mode (this indicator can be used to test or determine the cases of underestimated performance in certain situations).
Additional Information:

SMART (Self-Monitoring, Analysis and Reporting Technology, a technology built into most modern drives) for each hard drive. Also measures the data transfer rate in real mode (this indicator can be used to test or determine the cases of underestimated performance in certain situations). 

Works in the background and constantly analyzes the situation. If an error is detected or the threshold is exceeded certain parameters specified by the user will display a warning. In most cases SMART technology comes to the rescue, as this is one of the fastest and easiest ways to track changes in critical or critical drive parameters. 

As the sizes of hard disks are constantly increasing, the data stored on them is increasingly valuable to the user of the computer (especially for the company or the office). In this case, serious problems may occur after the hard disk fails. Hard Disk Manager can monitor the status of hard disks, including temperature and SMART (self-test, analysis and alert technology, built into most modern hard drives) of each disk. The program also measures the data transfer speed of the hard disk in real time, which can be used as a benchmark test or detect possible hard disk failure, deterioration of its performance. 

The program can be used to prevent serious damage or loss of data. The program warns the user if there is a problem before it happens and will make it possible to backup important and valuable data. Hard Disk Sentinel works in the background and constantly analyzes the status of the hard disk. If there is an error or unexpectedly detected behavior, the program warns the user about the current state. Usually the state of the hard drive can slowly deteriorate from day to day. SMART technology helps to predict possible failure by monitoring critical disk values. The program also displays the current temperature of the hard drive and remembers the previous temperatures that can be used to check the maximum temperature with a high hard drive

Features of the program:
Works with drives through IDE interfaces, Serial ATA and SCSI, determines the status and temperature in real mode; Indications are displayed instantly, there is no need to conduct long-term diagnostics; Displays the current and minimum temperature of the drives, specific attributes, depending on the manufacturer; Advanced users will find useful hours and hours of read / write errors; Interprets SMART performance and status values as a percentage for easier understanding;
With the help of special icons on the disks, the system displays the basic values of the state and used space, thus simplifying the control;
With the help of special icons on the disks, the system displays the basic values of the state and used space, thus simplifying the control;
It is possible to output the current temperature values to the system panel and subsequent warnings, in case of exceeding the threshold values; If you want, you can view detailed information on the status of all hard disks in a special window or small window and a full schedule of temperature changes from the moment the application is started;
Identifies drive models and displays detailed information about each of them, starting from the revision number / buffer size, and ending with all its other properties; Displays the current and maximum possible mode of data transfer;
The program calculates the total amount of data that has been copied or written to disk, displays the current read / write speeds and processor load;
Information on all sections in the system is displayed, regardless of the number of drives; In the future, this data is used for automatic warning and status display; 

In addition, a large number of additional options are available to configure for personal needs, advanced management of alerts, logging of collected data, synchronization of system time via the Internet, automatic shutdown and management of acoustic mode (if this function is supported by drives).

What's new in version 5.00:
Hard Disk Sentinel Revision History
Hard Disk Sentinel 5.00 (8/3/2017)
Improvements and new features:
added new disk testing method: Disk menu -> Surface test -> Repair disk drive
designed to repair weak/pending sectors: forces the hard disk to stabilize problems and force reallocation of bad sectors 
(if required). Can be used on even system drive with running operating system (registered Pro version only)
added manual repair of any disk sector in Disk Contents Inspector:
use Disk menu -> Surface test -> View (or start any surface test) and click on the disk surface map to view the raw contents of any sector. Go to the appropriate sector and if it is unreadable/reports error, the Repair button attempts to repair that (Pro version only)
added option to provide disk status information via WMI
(Configuration -> Advanced options -> Provide status information by WMI)
(disk information, status, health, temperature, text description, power on hours, bad sector count, weak sector count, comm.issue count, spin retry count, trim status, and complete S.M.A.R.T.) (registered Pro version only)
added option to test multiple hard disks by Disk menu -> Short self test / Extended self test (registered Pro version only)
added option to test multiple hard disks by Disk menu -> Surface test functions, by same test methods/options (registered Pro version only)
added support of high-DPI displays, including but not limited to 4K displays with high DPI scaling
added option to use TLS / STARTTLS in e-**** configuration regardless of port (previously used automatically only when port 587 specified)
added option to specify maximum try count in Disk menu -> Surface test functions before starting the test (Configuration tab)
added "lifetime writes" to TXT / HTML / XML reports
added option to perform write testing with any byte, byte/character sequence
Disk menu -> Surface test -> Write test -> Configuration page -> Write pattern
Specify 0xAA 0xBB etc. to specify hexadecimal sequence
added option to automatically save all results of disk tests:
Configuration -> Advanced options -> Automatically save disk test results to folder
saves images/graphs, log, results, block performance details after Disk menu -> Surface test functions
saves image after Disk menu -> Random seek test function
saves text report and brief log after Disk menu -> Short self test / Extended self test functions
automatic save of complete report upon disk status change/degradation (registered Pro version only)
added option: Configuration -> Advanced options -> Automatic detection based on disk utilization
automatically prevent detection if the disk utilization shows that the hard disk is inactive (sleeping), there is no data transfer, no read/write commands (based on the Disk Performance page)
added option to log alerts to Windows event log: Configuration -> Message settings -> Add to Windows event log (registered version only)
added option to Configuration -> Message settings to execute external command (or BAT file) when alert triggered (registered Pro version only). The following environment variables set to be accessible from the started external command (or BAT file):
HDS_TimeStamp : date and time of the actual alert in fixed format yyyymmdd hhmmss
HDS_TimeStampClean : date and time of the alert in user-friendly format (current Windows regional setting)
HDS_Host : current host (computer) name
HDS_Alert : the alert (eg. Overheat)
HDS_Disk : affected disk(s)
HDS_Threshold : threshold configured (contain Celsius/Fahrenheit or % symbols)
HDS_ThresholdValue : threshold configured (only the number)
HDS_Health : generic health information of all drives
HDS_Partition : generic partition information of all drives
HDS_LowestDiskHealth: the lowest health % value of all drives
Improved hardware support:
added support for InnoDisk industrial (micro) SD memory cards: detection of complete status, health, lifetime writes and additional statistics of (micro) SD memory card.
added support for Delkin industrial (micro) SD memory cards: detection of complete status, health, lifetime writes and additional statistics of (micro) SD memory card.
added support for MagicRAM industrial (micro) SD memory cards: detection of complete status, health, lifetime writes and additional statistics.
added support for industrial (micro) SD memory cards and USB devices based on Hyperstone controllers: detection of complete status, health, lifetime writes and additional statistics.

To enable status detection of industrial micro SD card detection, please select the card reader device from the list of drives and click on the Control device-specific detection label on the right, below the text description area. A new window appears, where it is possible to enable the detection. You may click on the Auto Detect button to verify if the device is responding to the detection. If yes, then the device type will be automatically selected.
Note: in the unregistered version, the above procedure need to be done every time the software started.
More information and example: How to: monitor (micro) SD card health and status
added detection of LTO tape drives: detect and display health, temperature, cleaning / media status. Tested with IBM Ultrium LTO5, Tandberg LTO5 tape drives
added support of HP Smart Array H240, P440, B140i RAID controllers: detect status of SATA / SAS hard disks, SSDs managed and configured into RAID array(s)
added support of Supermicro SMC2008, SMC LSI 2208 SAS/SATA RAID controller: detect status of SATA / SAS hard disks, SSDs managed and configured into RAID array(s)
added support of FTS PRAID EP400i SAS/SATA RAID controller
detection and support of non-standard byte-per-sector values: SAS hard disks formatted with 520 bytes/sector or 528 bytes/sector. Show bytes-per-sector for SCSI/SAS drives too.
all disk tests (Disk menu -> Surface test functions, Disk menu -> Random seek test, Disk menu -> Short/Extended self tests) work with hard disks formatted with 520 bytes/sector or 528 bytes/sector
improved UASP handling, showing USB Attached SCSI (UASP) in the Interface line on the Information page
improved compatibility with Areca SAS/SATA RAID controllers, detection of SAS drives in addition to SATA drives on ARECA RAID controllers
improved compatibility with Intel / LSI embedded Megaraid controllers and newer drivers
improved support of HighPoint RAID controllers
improved support of Sandisk Extreme pendrives (reported 0% health, indicating failure on new devices due to special S.M.A.R.T. attributes)
improved support of Sandisk, Kingston, ADATA, Samsung, OCZ, Intel, Toshiba, Intenso, Zheino SSDs
improved support of external Orico, Sabrent, Sharkoon DriveLink Combo devices
added detection again of Via Labs Inc VL711 bridge chip - if the detection is safe (detection completely disabled in 4.71 version)
improved support of older SCSI HP Smart Array 642, 6400 controllers
improved support of LSI/Dell/Avago SATA/SAS RAID controllers and HBAs (Host Bus Adapters), improved power on state and disk self test functions with such controllers
improved support of JMicron external RAID enclosures and standalone devices with JMicron 56x chipsets
improved detection and compatibility with Marvell 9230 RAID controllers
added support of newer SanDisk CloudSpeed SSDs, Kingston SSDs
added support of NVMe SSDs from various manufacturers (Intel, OCZ, Liteon, Samsung, Toshiba, etc.)
added support for Toshiba OCZ RD400 NVMe SSD
improved power on time detection and display of many SAS/SCSI hard disks and SAS SSDs
improved support of 1.8" hard disk drives
improved support of Maxtor ATLAS SCSI / SAS hard disks
added support of Prolific PL3507 IDE-USB bridge
improved support of VIA, JMicron RAID controllers
Bug fixes, further modifications:
fixed: LSI/Intel embedded controllers with newer drivers may lock up systems completely (or resulted BSOD) when accessed. Do not attempt detection of any LSI RAID controller when such embedded RAID controller found. Solution: switch the Embedded RAID controller to AHCI mode or use an older driver (2014 or previous) to enable LSI-specific detection
improved detection and reporting of file information if file(s) located on unreadable/repaired sectors
improved write tests / disk wipe functions (Disk menu -> Surface test -> Write test, Write+Read test, Reinitialise disk surface test)
increased Configuration window to improve readability and visibility
fixed: status window display with high resolution
fixed: disk tray icon could be completely missing if the comment was too long
fixed: Copy to clipboard function on logical disk information page was not working
fixed: disk alert window health list of all disk drives connected
fixed: do not show capacity-warning if Paragon GPT loader used
fixed: working again under Windows 98, ME, NT4 (previous version did not start)
show started test type after the test completes in the popup window
improved XML report output with Portable version
show comment field in the Open status of offline disk(s) window to help identify drives
user interface fixes, modifications
changed warranty check links
updated installer and signature
improved Russian, Chinese language support
التبليغ عن خطأ